Simple Silver Logo
60 day money-back
Guaranteed
Simple Silver Logo
60 day money-back
Guaranteed
Simple Silver Logo
60 day money-back
Guaranteed
Simple Silver Logo
60 day money-back
Guaranteed
Simple Silver Logo
60 day money-back
Guaranteed
Simple Silver Logo
60 day money-back
Guaranteed

Getting Started

First Time User - Follow Steps 1 - 3
Repeat User - Please scroll down to the "Repeat User" heading below

Overview

  1. As a first time simplesilver™ user, whether you have a new or existing hot tub, you will need to make sure it is clean. There are various reasons why your hot tub may not be clean - after factory testing - during shipping from the manufacturer or retailer - substandard maintenance.
  2. Secondly, the correct amount of simplesilver™ minerals need to be released into the water to effectively balance the pH, alkalinity, total dissolved solids & limiting the formation of scale & corrosion - this takes time.

Step 1 - Installation Process

There is no need to drain the water in your hot tub unless you were previously using bromine
  • Simply place the simplesilver™ blue tablet anywhere in your hot tub water.
  • The tablet must be kept in the water for the 12 month duration.
  • If you have been using bromine "click here for more information"
Now go to Step 2
Note - If your hot tub has been empty for a period, we recommend completing our santising "Solution 2" process as there could still be dirty water within the system "click here for these printable instructions"

Step 2 - Filter Pump Set-up

A - You need to set your filter circulation pump timer to operate daily

To set this up "click here to see our Controller Settings"

  • Remember:
    • Turn the filter pump onto automatic mode
    • Turn off the sleep timer
    • Turn off holiday mode
    • Turn off energy-saving mode
    • Make sure to open all jet heads & water features
Note - It is critical that the filter circulation pump is set correctly to circulate 100,000 litres of water per day. This ensures that the correct amount of simplesilver™ minerals are released automatically into the water at a constant & controlled rate to balance it.
B - Once the filter pump timer has been set, do not use your hot tub for the next 7 days
  • It takes time for the correct amount of simplesilver™ minerals to be released into the water at a constant & controlled rate to effectively balance the pH, alkalinity, total dissolved solids, scale & corrosion.
C - At the end of the 7 day period
  • Clean the filters using a filter cleaning solution - as water alone is ineffective.
  • Dry the filters before re-installing - this makes the filters more effective as the fibres expand - it will also stop the water foaming.

Note - If you use the hot tub before this 7 day period, there will not be sufficient simplesilver™ minerals in the water to effectively balance the waters pH, alkalinity, total dissolved solids, scale & corrosion.

Now go to Step 3

Step 3 - Use the Hot Tub

After Day 7
  • You have now cleaned your filters using a filter santising solution.
  • As a reference, your hot tub water "Should Always Look Like This" when using simplesilver™.
  • If so, enjoy your hot tub.

Note - If your hot tub water is not crystal-clear or if it has an odour, things are not right. For help "click here to see our Troubleshooting section"

  • To comply with local & government guidelines, a small amount of chlorine must be added after use to control the bacterial levels.
  • Generally, about a teaspoon of chlorine is needed for a standard size hot tub - 5 grams per 1000 litres of water.
  • However, the amount of chlorine to be added will depend on - bather loading - usage - amount of water in the hot tub.
  • Please follow the chlorine manufacturers instructions for use.
  • Bromine can't be used.
Then
  • Follow the Filter Maintenance instructions below at least every two weeks to ensure pristine water.

Note - If the filters become 50% blocked, then during the filter cycle, only 50% of the water will circulate. Therefore only 50% of the simplesilver™ minerals will be released, therefore 50% effective.

Filter Maintenance

Regular Filter Cleaning
  • At least every two weeks clean your filters using a filter sanitising solution.
  • Water alone is ineffective in cleaning the filters as it cannot breakdown any skin, perspiration, oils, lotions, hair, water salts, dust, dirt & other foreign matter.
  • While the filters are removed, with a cloth & container of water (to rinse the cloth), wipe the insides of the filter cavity & housing area.
  • This area is commonly overlooked & can be a cause of unpleasant odours & slippery feeling sides.
  • Make sure the filters are dry before reintroducing these as the filter fibres will expand making these more effective.
  • Dry filters also stops the water from foaming.

Note - Your filters are an integral part of the water maintenance process & have a finite life of 12 months.
At this point, they will block up & no longer be effective or able to be cleaned - this will turn the water cloudy.

Repeat User

Installation & Best Practice
  • Since you have already been using simplesilver™, all you have to do is put the new simplesilver™ tablet into the water.
  • However, prior to installing your new simplesilver™ tablet, we recommend that the water should be changed & the hot tub cleaned.
  • Once you have refilled the hot tub & installed the new simplesilver™ tablet, it will take 5 days for the correct amount of simplesilver™ minerals to be released into the water to effectively balance the pH, alkalinity, total dissolved solids, scale & corrosion.
  • To comply with local & government guidelines, a small amount of chlorine must be added after use to control the bacterial levels.
  • Generally, about a teaspoon of chlorine is needed for a standard size hot tub - 5 grams per 1000 litres of water.
  • However, the amount of chlorine to be added will depend on - bather loading - usage - amount of water in the hot tub.
  • Please follow the chlorine manufacturers instructions for use.

Note - If you use the hot tub before this 5 day period, there will not be sufficient simplesilver™ minerals in the water to effectively balance the waters pH, alkalinity, total dissolved solids, scale & corrosion.

Then
  • Follow the Filter Maintenance instructions above at least every two weeks to ensure pristine water.
  • "I have to compliment you on this product. I bought one hoping it would work as it sounded just so simple, almost too good to be true. However, I am about to buy my third and I just cannot praise Simplesilver highly enough. It is simple, it is effective and a pleasure to soak in my hot tub knowing I'm not absorbing nasty chemicals. Thank you. "
    - Sue W
  • "I’m a pharmacist so I know about chemicals. I used to throw in so many different chemicals into our hot tub, trying to get the right balance, but we’d still end up bathing in a chemical soup. With simplesilver™ you just chuck it in forget about it, the hot tub water’s always crystal clear and it doesn’t smell - it's just absolutely the best thing ever!"
    - Yvette Urlich
  • "We purchased a new hot tub and selected a non-chlorine water treatment product (not simplesilver™). After two months of mucking about, water the colour of milk and not getting any better, we had had enough and changed to simplesilver™. It’s been two months now and the hot tub water is as clear as the day we put it in. It’s the best product on the market for hot tubs, so simple! No testing, no chemicals, not having to put in a quick fix each week, anyone that does not use simplesilver™ is clearly mad!! My Saturday task is to clean the filter and replace it with the spare I had cleaned from the previous week, all of 10 minutes, brilliant! Its a fantastic product and worth every cent. Update October 2019 - Just letting you know I am still using simplesilver, must be about 5 years now and have never ever had any problems and the hot tub is still running the same as it was when new. Once again a fantastic product!!"
    - Bruce
  • "I developed a skin thing using the other stuff - chlorine, bromine. I came up with blisters, itching. I tried a range of chemical options but found in the end that nothing solved my problem, until I discovered a fellow sufferer whose skin irritation problems were solved by replacing all the chemicals in his hot tub with simplesilver™. I bought it and sure enough, it was fine. I’ve been able to get back into the hot tub again with no reaction. I’m nothing but pleased with simplesilver™."
    - Paul Mcleod
  • "My skin is really wrecked and sensitive. I used to get skin irritations from the chemicals like chlorine but since I’ve used simplesilver™ I can go into our hot tub and get no side-effects. I Like the fact that you can put in the simplesilver™ tablet and that's it - that's all you have had to do. It’s so simple! You don’t do pH up and pH down and all that. You don’t do anything with simplesilver™ - it just goes on and on and on. We’ve used simplesilver™ for about nine years. I would absolutely recommend it to other people."
    - Zelda Sayers
  • "We have used simplesilver™ in our hot tub for about 12 years and find it amazing!! My husband has very sensitive skin that reacts with traditional chemicals so using simplesilver™ is a real benefit as he can enjoy the hot tub without any side effects. We have told various friends with tubs, all have purchased simplesilver™ and have had the same amazing experiences!!"
    - Bronwyn Steers
  • "We used other chemicals for a while but with simplesilver™ you don’t have to worry about testing the water every day. I like the ease and simplicity of it. Also I like sitting in the hot tub and not having to breathe chemical fumes - and I like the feel of the water with simplesilver™ – it kind of feels soft. I’m very happy with it simplesilver™ and I would absolutely recommend it to everybody."
    - Brenda Fleming
  • "We didn’t like the chlorine. We didn’t like have to deal with them all the time and we didn’t like smelling of chlorine. This simplesilver™ is the easy option – and we don’t have to go and shower after a swim. It’s fantastic stuff. We’ve used it for about eight years and we’ve recommended it to several people. It’s brilliant because we don’t have to do anything and we don’t smell of chlorine after we’ve been in the hot tub. And the hot tub is mint - no effect - just like new. All piping and everything is all working just like new. We’ve never had to do a thing to it. simplesilver™ is just brilliant!"
    - Mrs Green
  • "I have to compliment you on this product. I bought one hoping it would work as it sounded just so simple, almost too good to be true. However, I am about to buy my third and I just cannot praise Simplesilver highly enough. It is simple, it is effective and a pleasure to soak in my spa pool knowing I'm not absorbing nasty chemicals. Thank you. "
    - Sue W
  • "I’m a pharmacist so I know about chemicals. I used to throw in so many different chemicals into our spa pool, trying to get the right balance, but we’d still end up bathing in a chemical soup. With simplesilver™ you just chuck it in forget about it, the spa pool water’s always crystal clear and it doesn’t smell - it's just absolutely the best thing ever!"
    - Yvette Urlich
  • "We purchased a new spa pool and selected a non-chlorine water treatment product (not simplesilver™). After two months of mucking about, water the colour of milk and not getting any better, we had had enough and changed to simplesilver™. It’s been two months now and the spa pool water is as clear as the day we put it in. It’s the best product on the market for spa pools, so simple! No testing, no chemicals, not having to put in a quick fix each week, anyone that does not use simplesilver™ is clearly mad!! My Saturday task is to clean the filter and replace it with the spare I had cleaned from the previous week, all of 10 minutes, brilliant! Its a fantastic product and worth every cent. Update October 2019 - Just letting you know I am still using simplesilver, must be about 5 years now and have never ever had any problems and the spa pool is still running the same as it was when new. Once again a fantastic product!!"
    - Bruce
  • "I developed a skin thing using the other stuff - chlorine, bromine. I came up with blisters, itching. I tried a range of chemical options but found in the end that nothing solved my problem, until I discovered a fellow sufferer whose skin irritation problems were solved by replacing all the chemicals in his spa pool with simplesilver™. I bought it and sure enough, it was fine. I’ve been able to get back into the spa pool again with no reaction. I’m nothing but pleased with simplesilver™."
    - Paul Mcleod
  • "My skin is really wrecked and sensitive. I used to get skin irritations from the chemicals like chlorine but since I’ve used simplesilver™ I can go into our spa pool and get no side-effects. I Like the fact that you can put in the simplesilver™ tablet and that's it - that's all you have had to do. It’s so simple! You don’t do pH up and pH down and all that. You don’t do anything with simplesilver™ - it just goes on and on and on. We’ve used simplesilver™ for about nine years. I would absolutely recommend it to other people."
    - Zelda Sayers
  • "We have used simplesilver™ in our spa pool for about 12 years and find it amazing!! My husband has very sensitive skin that reacts with traditional chemicals so using simplesilver™ is a real benefit as he can enjoy the spa pool without any side effects. We have told various friends with tubs, all have purchased simplesilver™ and have had the same amazing experiences!!"
    - Bronwyn Steers
  • "We used other chemicals for a while but with simplesilver™ you don’t have to worry about testing the water every day. I like the ease and simplicity of it. Also I like sitting in the spa pool and not having to breathe chemical fumes - and I like the feel of the water with simplesilver™ – it kind of feels soft. I’m very happy with it simplesilver™ and I would absolutely recommend it to everybody."
    - Brenda Fleming
  • "We didn’t like the chlorine. We didn’t like have to deal with them all the time and we didn’t like smelling of chlorine. This simplesilver™ is the easy option – and we don’t have to go and shower after a swim. It’s fantastic stuff. We’ve used it for about eight years and we’ve recommended it to several people. It’s brilliant because we don’t have to do anything and we don’t smell of chlorine after we’ve been in the spa pool. And the spa pool is mint - no effect - just like new. All piping and everything is all working just like new. We’ve never had to do a thing to it. simplesilver™ is just brilliant!"
    - Mrs Green
60 day money back
Guaranteed
If simplesilver™ doesn’t clear your hot tub, contact us within 60 days from purchase and we’ll give you your money back.
60 day money back
Guaranteed
If simplesilver™ doesn’t clear your spa pool, contact us within 60 days from purchase and we’ll give you your money back.
© Copyright 2024 simplesilver™. All rights reserved
Note: simplesilver™ is for domestic hot tub use.
Not for commercial applications.
© Copyright 2024 simplesilver™. All rights reserved
Note: simplesilver™ is for domestic spa pool use.
Not for commercial applications.